Geberit Mapress Stainless Steel Bend 45° (15mm - 108mm)
This Geberit Mapress stainless steel bend is a press-fit pipe fitting used to change the direction of a run within the Geberit Mapress press-fit system. Rather than soldering, the connection is made by pressing the socket onto the pipe, giving a secure, flame-free joint in seconds with no hot-works permit required. It is manufactured from CrNiMo steel 1.4401 (EN 10088) for excellent corrosion resistance.
Each fitting is engineered for installation security: a built-in pressing indicator and a deliberately leaky-if-unpressed design make any missed joints immediately obvious during testing, while the transparent protection plug keeps the pressing socket clean until assembly. The CIIR seal ring ensures a reliable, long-life seal across the system's approved media.
Key features
- Pressing indicator
- Leaky if unpressed
- Seal ring made of CIIR, black
- Pressing socket with transparent protection plug
Suitable for
- For cold and hot potable water
- For cooling and heating water without antifreeze agent
- For cooling and heating water with antifreeze agent
- For district heating water ≤ 120 °C
- For saturated steam ≤ 120 °C
- For service water and process water
- For treated water
- For rainwater with a pH value ≥ 5.5
- For grey and black water with a pH value ≥ 5.5
- For extinguishing water (wet)
- For extinguishing water (wet/dry, dry)
- For sprinklers (wet)
- For chemicals and technical liquids
- For compressed air (oil purity class 0–3)
- For negative pressure
- For inert gases (e.g. nitrogen)
- For industrial gases (e.g. acetylene, shielding gases)
- For technical building systems, industry and shipbuilding
Available in a range of sizes from 15mm to 108mm.
