Geberit Mapress Stainless Steel Bend With Plain End 45° (15mm - 108mm)
The Geberit Mapress Stainless Steel Bend with Plain End is a press-fit pipe bend that forms part of the Geberit Mapress system, allowing you to change the direction of a run with a secure, permanent connection made in seconds. Because it is pressed rather than soldered, there is no flame, no hot-works permit and no waiting for joints to cool, helping you work faster and safer on site. The fitting is manufactured from CrNiMo steel 1.4401 (EN 10088) for strength and corrosion resistance, with the exact angle varying by variant.
Every Mapress joint is engineered for installation security: the pressing indicator gives a clear visual confirmation that the connection has been pressed, while the leak-before-pressed design ensures any unpressed fitting is easily identified during testing. The pressing socket is fitted with a transparent protection plug and a CIIR seal ring to keep the joint clean and reliable until it is pressed home.
Key features
- Pressing indicator
- Leaky if unpressed
- Seal ring made of CIIR, black
- Pressing socket with transparent protection plug
Suitable for
- For cold and hot potable water
- For cooling and heating water without antifreeze agent
- For cooling and heating water with antifreeze agent
- For district heating water ≤ 120 °C
- For saturated steam ≤ 120 °C
- For service water and process water
- For treated water
- For rainwater with a pH value ≥ 5.5
- For grey and black water with a pH value ≥ 5.5
- For extinguishing water (wet)
- For extinguishing water (wet/dry, dry)
- For sprinklers (wet)
- For chemicals and technical liquids
- For compressed air (oil purity class 0–3)
- For negative pressure
- For inert gases (e.g. nitrogen)
- For industrial gases (e.g. acetylene, shielding gases)
- For technical building systems, industry and shipbuilding
Available in a size range of 15mm to 108mm.
