The Geberit Mapress Stainless Steel bend gives you a gentle 30° change of direction in a Mapress stainless steel press-fit run, for offsets and easy-angle turns without welding, flame or thread cutting on site.

Built in CrNiMo stainless steel 1.4401 (EN 10088) with a black CIIR seal ring, it carries a pressing indicator so you can see at a glance that the joint has been correctly pressed, plus a transparent protection plug on the socket to keep the seal clean until it's fitted.

Key features

• Pressing indicator
• Leaky if unpressed
• Seal ring made of CIIR, black
• Pressing socket with transparent protection plug

Suitable for

• For cold and hot potable water
• For cooling and heating water without antifreeze agent
• For cooling and heating water with antifreeze agent
• For district heating water ≤ 120 °C
• For saturated steam ≤ 120 °C
• For service water and process water
• For treated water
• For rainwater with a pH value ≥ 5.5
• For grey and black water with a pH value ≥ 5.5
• For extinguishing water (wet)
• For extinguishing water (wet/dry, dry)
• For sprinklers (wet)
• For chemicals and technical liquids
• For compressed air (oil purity class 0–3)
• For negative pressure
• For inert gases (e.g. nitrogen)
• For industrial gases (e.g. acetylene, shielding gases)
• For technical building systems, industry and shipbuilding

Available in a size range from 22mm to 28mm.