Geberit Mapress Stainless Steel T-Piece, Equal (15mm - 108mm)
The Geberit Mapress Stainless Steel T-piece, equal is a press-fit branch fitting that forms part of the Geberit Mapress press-fit system, allowing three pipe runs to be joined at a 90° tee. Pressed in seconds with a Mapress tool, it makes a secure, flame-free connection with no soldering, brazing or hot-works permit required, helping to speed up installation and reduce on-site risk. It is manufactured from CrNiMo steel 1.4401 (EN 10088) for durability and corrosion resistance.
Geberit press-fit security is built in: each fitting carries a pressing indicator and is designed to leak if left unpressed, so any unpressed joint is identified during the leak test before commissioning. The pressing socket is fitted with a transparent protection plug and a CIIR seal ring, keeping the connection clean and reliable.
Key features
- Pressing indicator
- Leaky if unpressed
- Seal ring made of CIIR, black
- Pressing socket with transparent protection plug
Suitable for
- For cold and hot potable water
- For cooling and heating water without antifreeze agent
- For cooling and heating water with antifreeze agent
- For district heating water ≤ 120 °C
- For saturated steam ≤ 120 °C
- For service water and process water
- For treated water
- For rainwater with a pH value ≥ 5.5
- For grey and black water with a pH value ≥ 5.5
- For extinguishing water (wet)
- For extinguishing water (wet/dry, dry)
- For sprinklers (wet)
- For chemicals and technical liquids
- For compressed air (oil purity class 0–3)
- For negative pressure
- For inert gases (e.g. nitrogen)
- For industrial gases (e.g. acetylene, shielding gases)
- For technical building systems, industry and shipbuilding
Available in a size range from 15mm to 108mm.