Tel: 01443 841 666
Handrail | Fastclamp Fittings| C59 Angle Base Flange (11° to 30°)
C59 Angle Base Flange (11° to 30°)

Similar to a type C53, it is used to set the upright angle between 11°- 30°. This fitting should only be subjected to light loads which cannot be positioned at 90° to the applied load. For greater loads or other tube sizes a type C12 flange should be used with the upright bent to the required angle 0 indicates the diameter of the fixing hole
Data Sheets

IDF Seal
Copyright © 2017 Flocon Valves & Fittings ltd. All Rights Reserved